BDNSJ - O-S-801 SULFURIC ACID, ELECTROLYTE BATT CL3
- MSDS: BDNSJ
- Manufacturer: SCHOLLE ATLANTA CORP
- Product Name: O-S-801 SULFURIC ACID, ELECTROLYTE BATT CL3
- National Stock Number: 6810-00-249-9354
Product Identification
Product ID:O-S-801 SULFURIC ACID, ELECTROLYTE BATT CL3
MSDS Date:01/01/1985
FSC:6810
NIIN:00-249-9354
MSDS Number: BDNSJ
Responsible Party
COLLEGE PARK, GA 30337-5502
US
Cage: 3D868
Contractor
Cage: 3D868
Ingredients
SULFURIC ACID (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 36.5%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 63 - 68%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYE, NOSE, AND THROAT IRRITATION, PULMONARY
EDEMA, BRONCHIAL EMPHYSEMA, CONJUNCTIVITIS, STOMATITIS, DENTAL
EROSION, TRACHBRONC, CHEMICAL BURNS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE CPR.
IF BREATHING IS DIFFICULT GIVE OXYGEN. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER. SKIN: WASH WITH SOAP AND WATER. REMOVE
CONTAMINATED CLO THING AND SHOES. INGESTION: DO NOT INDUCE
VOMITING. NOTHING BY MOUTH IF UNCONSCIOUS. GET MEDICAL ATTENTION
IMMEDIATELY.
Fire Fighting
Extinguishing Media:DRY CHEMICAL. DO NOT USE WATER ON ACID TO AVOID
SPLATTERING.
Fire Fighting Procedures:WEAR PROTECT CLOTHES AND AN ABSORBING GAS MASK
CANNISTER.
Unusual Fire/Explosion Hazard:SULFURIC ACID MAY REACT WITH METALS TO
PRODUCE AN EXPLOSIVE MIXTURE OF HYDROGEN GAS.
Accidental Release
Spill Release Procedures:COVER WITH SODIUM CARBONATE OR AN EQUAL
MIXTURE OF SODA ASH AND SLAKED LIME. AFTER MIXING, ADD WATER IF
NECESSARY TO FORM A SLURRY. DO NOT USE CLOTHS OR SAW DUST OR OTHER
COMBUSTIBLES.
Neutralizing Agent:SODA ASH
Handling
Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE AND
PREVENT CONTACT WITH WATER. SEPARATE FROM CARBIDES, CHLORATES,
FULMINATES, NITRATES, PICRATES, POWDERED METALS.
Other Precautions:SEPARATE FROM COMBUSTIBLES MATERIALS. WEAR RUBBER
GLOVES, CHEMICAL GOGGLES, RUBBER BOOTS AND CHEMICAL A CARTRIDGE
RESPIRATOR.
Exposure Controls
Respiratory Protection:CHEMICAL CARTRIDGE RESPIRATOR.
Ventilation:AS REQUIRED TO CONTROL THE TLV IN AIR.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:RUBBER APRON, SAFETY SHOWER, SAFETY EYEBATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:230F,110C
Vapor Pres:< 0.1
Vapor Density:1.0
Spec Gravity:1.265
Evaporation Rate & Reference:< 0.1 (BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS, CLEAR, OILY LIQUID. ODORLESS
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
CARBIDES, CHLORATES, FULMINATES, NITRATES, PICRATES, POWDERED METALS,
ORGANIC MATERIALS.
Stability Condition to Avoid:HIGH HEAT, MOISTURE
Hazardous Decomposition Products:OXIDES OF SULFUR, HYDROGEN SULFIDE,
HYDROGEN GAS.
Disposal
Waste Disposal Methods:ADD SLOWLY TO A LARGE AMOUNT OF SOLUTION OF SODA
ASH AND SLAKED LIME BY STIRRING. DISCHARGE THIS SOLUTION WITH A
LARGE AMOUNT OF WATER INTO AN APPROVED DISPOSAL AREA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.